This week the subject of my blog post is Pavia a project update. I have been working on both the park gates and the Spanish light Cavalry.
Park gates.
The only park gate that is somewhat intact is the gate at Certosa di Pavia. This gate is in the New park. I have not found much information about the design of the gates around the old park. I am going to assume that all of the gates, around both parks were of the same design. This assumption will have the added benefit that they will be easier to mass produce. As I am going to need six to eight gates for the old park, that is an important decision. Here are some images of the actual gate courtesy of Google Street View.
Making the park gates
I contacted a couple of terrain building manufacturers to see what was possible. However, I eventually came to the conclusion that I was going to have to scratch build these gates. Foam was selected as the base material. I decided to buy a decent foam cutter to make the job easier. I will also be building many of the five chapel churches and the Castle Mirabello. With all of these buildings the cutter should be a good investment.
Here is my second attempt at cutting some of the front facade of the gates. The first attempt is in the bin. The cut facades are sitting on the foam cutter. This is my first attempt to make a foam building. The process is interesting. Don’t be too critical of my first attempts.
Here is my first attempt to carve the brick and paint the walls. I still need to weather and dull down the brick. As you will notice the bricks are larger than those in the original. This is because the required skill level to make smaller bricks is beyond my current ability. With eight gates and fifty feet of wall, I think that the overall impression will be good. It is a compromise that I am prepared to make.
Over the coming weeks I plan to finish two or three gatehouses. There is still a lot of work to do, I need to make the sides, back, roof and details at the top and then glue everything together. I also plan to use some pigments to improve the bricks. They will be minus some wooden arched doors in the centre at the moment. The company “Things from the Basement” are selling me some custom doors. These will be made from laser cut wood and they will be bringing them to Historicon for me in July.
Spanish light cavalry
I had 32 Spanish Jinetes and for Pavia I need 62. Over the last few weeks I painted up the remainder. I still need to touch up the flag edges of the new figures, but other than that, they are done. The first picture shows the Jinetes and the second picture includes a few mounted arquebusiers in support.
These Jinetes complete the dedicated Spanish Light Cavalry command. I always love playing with Jinetes in the Pike and Shotte rules. They use the fire and evade rule, which works really well for them.
Hopefully next time I will have more work to show you on the gates. I also will have 60-70 Italian foot arquebusiers that I am working on. They are beautiful sculpts from SteelFist Miniatures. I am also expecting another 80 heavy cavalry in the post soon and I am looking forward to painting them. That is all for this blog post, Pavia a project update.